Skip to Content
Home └Visual Testing (VT) - Level II └VT II B Specific

Visual Testing (VT) - Level II

0 %

Completed

Course content

VT II B Specific

10 XP
Prev Next
Fullscreen Share
Rating
0 0

There are no comments for now.

Join this Course
to be the first to leave a comment.

1. Per SOP-11-02, the proposed starting target for the remote resolution demonstration is:
A neutral gray card with a 1/32 in. (0.8 mm) black line, to be confirmed or replaced by the Level III A 1/8 in. (3 mm) drilled hole A Jaeger 1 chart at 12 in. Any printed text on the job drawing
2. Per SOP-11-02, the remote resolution demonstration shall be repeated:
Only when the examiner changes Only when the image looks poor At each shift or setup, after any component change, drop or repair, and at least annually Only annually
3. Per SOP-11-02, the examiner finds the visual acceptance criteria in:
The referencing code or client specification, recorded with edition and paragraph on the report before examination The examiner's own experience Tables transcribed into SOP-11-02 SOP-11-04
4. Per SOP-11-02, if two references conflict, the examiner shall:
Stop and wait for the client to choose Apply the more stringent requirement and report the conflict to the QC Mgr. in writing Choose the requirement that is easier to meet Apply the most recent document
5. Under SOP-11-02, the translucent visual technique is:
Covered in Section 9.0 Used only with remote equipment Not used and not covered Used for stainless steel tubing
6. Per SOP-11-02 and SOP-11-04, acceptance inspection of work to AWS D1.1 shall be performed by:
A trainee under supervision The welding foreman An AWS CWI, or a CAWI working under a CWI Any VE Level II under SOP-11-04
7. Per SOP-11-02, a remote system may be used to size an indication only when:
The indication is longer than 1 in. The image is in focus The QC Mgr. is present Its measurement scale has been verified on a reference of known size at that setup and recorded
8. Per SOP-11-04, colour-contrast vision shall be re-examined:
Annually, together with near vision Only at initial certification Every 3 years Every 5 years
9. Per SOP-11-04, near vision and colour contrast examinations expire:
Exactly 6 months after the examination On the last day of the 12th month after the month of the examination With the 3-year certification On 31 December of each year
10. Per SOP-11-04, an eye-care examination performed while the eyes are dilated is:
Not accepted for near vision Accepted for colour contrast only Accepted if Jaeger 1 is read Accepted if signed by an optometrist
11. Per SOP-11-04, a candidate who fails an examination may be re-examined:
The next day, using the same examination form After at least 30 days or documented additional training, using a new examination form Immediately, with the answer key reviewed first Only after 12 months
12. Per SOP-11-04, the VE practical examination shall include at least:
10 checkpoints and 70% detection overall 20 checkpoints and 100% detection 5 checkpoints and 70% detection 10 checkpoints, and the candidate shall detect at least 80% of the specified conditions in each specimen
13. Per SOP-11-04, practical specimen grades are:
Averaged across all specimens Combined with the written score Dropped for the lowest-scoring specimen Graded on their own; grades are not averaged to make up a failed specimen
14. Per SOP-11-04, the VE practical examination is administered by:
The Level III, in person; live video does not count The QC Mgr. alone The Level III by live video Any certified VE Level II
15. Under B31.3 (2024) 344.7, which of the following is an in-process examination item?
Positive material identification of filler wire Hardness testing of the weld cap Radiographic film density Fit-up, joint clearance and internal alignment before joining
16. Per SOP-11-02, where the Traveler is silent on whether a fit-up check is VT:
The Level III decides after the weld is complete The QC Mgr. decides before work proceeds and records the decision on the Traveler The fitter decides The examiner treats it as a work check
17. Per SOP-11-02, a correction to a VT report is made by:
Correction fluid and re-writing A single line-through, initialed and dated Overwriting the original entry Discarding the form and re-writing it
18. Per SOP-11-04 (with SOP-07-01), the preliminary air test before a hydrostatic test is at:
5 psi 150 psi 1.5 times design pressure 25 psi
19. Per SOP-11-02, a 'reject' caused by the examiner's own setup error (for example, an uncalibrated meter) is:
Sent to the welder for repair A weld reject that requires an NCR Not a weld reject; the examination is redone and the cause noted Accepted if the weld looks good
20. Per SOP-11-04, the annual performance review of a VE Level II is:
Performed by the examiner's supervisor every 3 years Performed by the client's inspector Performed by the QC Mgr. by the end of the certification anniversary month and signed by the Level III Optional if no rejects were found